Please Note: We are currently working on the Swiss website and you may not find all products here.

Scinomix Sci-Print MP2

SKU: SC2000-0753

You need to log-in to order

The Sci-Print MP2

A semi-automated barcode label printer

The Sci-Print MP2 from Scinomix is a semi-automated label printer for microplates. The Sci-print MP2 prints and applies labels to a wide variety of microtiter plates that are on the market.

Want a way to track your valuable samples? With the Sci-Print MP2 you are able to print and apply sticker labels to your micro-plates and never loose track of your samples again. The system allows you to print any text you like. The MP2 even prints standard laboratory barcodes, including 1D and 2D.

Turn the Sci-Print MP2 into a fully automated system

To enable you to focus on your core research.

The Sci-print MP2 can be used in a manual stand-alone environment. But what makes the MP2 so valuable is the ability to integrate it into a fully automated system, which gives you valuable walk-away time. Versatile software allows the system to be used as a stand-alone device, or integrated into automated plate handling systems. An optional barcode scanner can be added to the system for validation.

With its rotating, height-adjusting platform, the MP2 provides the flexibility to print on all four sides and two vertical levels of the plate and deep well blocks.

The Sci-print MP2 is also a fast operating system. It applies a single label in just under four seconds. This means that the Sci-Print MP2 is ideal for high-through put working environments.

Print a wide variety of sample tracking codes

Or anything you want

In the regular setup you get delivered, there is already a wide variety of codes you are able to print. These following code symbologies are enabled upon delivery:

  • Code 128
  • Code 39 (full ASCII)
  • Interleaved 2 of 5
  • Data Matrix (2D)

Do you require to print anything outside of this list? Feel free to contact us so we can see if we can further assist you. We always try to assist you and adapt the system to your needs.


Product features

Small footprint

The Sci-Print MP2 is a small, compact device that saves valuable space in the lab.


With the Sci-Print MP2, users can print a variety of 1D and 2D barcodes.


The Sci-Print MP2 is a compact device that increases walk-away time in the lab, accelerating productivity.


With the Sci-Print MP2, users can consistently place barcodes on a variety of sample storage racks.

  • Labeling Speed 4 seconds per label
  • Labels up to 4 sides of a plate
  • Optional barcode scanner for validation
  • Windows based software printer
  • Includes 600 dpi thermal transfer printer
  • Easily integrates into third-party systems
  • Standard label size 2.0″ W x 0.25″ H
  • Plate type reqruirements ANSI/SLAS plates
  • Max Plate Height 46mm
  • Min Plate Height 6mm
  • Air pressure requirements 80-90 PSI @ 2.5 CFM
  • Air-compressor requirements Oil/contaminant free
  • Air-compressor components requirements Inline Regulator, Air dryer
  • Main Power Requirements Printer 110-240V AC @2A 50-60Hz
  • Main Power Requirements Power Supply 120-240VAC @ 1.4A, 50-60Hz
  • Provided Power Supply Output Voltage 24 V DC
  • Max Output Current 2.71 A
  • Max Output Power 65 W
  • Max Ripple and Noise 240 mV p-p
  • Transport and Storage Temperature: -20 degrees C to +55 degrees C
  • Operating Environment Indoor Only
  • Operating Temperature 10 degrees C to 40 degrees C
  • Operating Humidity 20% to 80% non-condensing
  • Operating Altitude Up to 2000M
  • Width: 7.7” (196mm)
  • Height: 12.4” (358mm)
  • Depth: 28.9” (733mm)
  • Weight: 37.5 lb. (17KG)

Satisfied customers

That's why we do it

"I experience NBS Scientific as an excellent partner with pleasant employees. I have good contact with them."

"NBS Scientific provides good technical service to our systems. The Technical service specialists have a lot of knowledge and handle short lead times."

"At NBS Scientific I got quick and reliable responses to questions and appointments. All advice and attention was expertly given. We've been happily working together for over 2 years now."

Roche Diagnostics

Need more information?

Don't hesitate to contact us

Want to learn more about the Sci-Print MP2? Eager to request a demo? Contact us today with your questions.

Request more info - Equipment

  • Hidden
  • This field is for validation purposes and should be left unchanged.

Product downloads

View the accompanying brochures

  • Sci-Print MP2 - Semi-Automated Plate Handler Download
  • ANSI/SLAS (1-2004) Footprint Dimensions Download

Related products

These products are also often chosen

Scinomix Plate Labels

The Plate labels by Scinomix remain fully attached to your plate at low temperatures and even when they come in contact with chemicals and organic solvents.
View product

Scinomix Sci-Print MP2+

The Sci-Print MP2+ plate labeller is a very nice addition to both high and low throughput laboratory environments. Upgrade the stackers to hold even more microplates or deepwell blocks.
View product

Scinomix Sci-Print MP2

The Sci-Print MP2 is a semi-automated label printer that prints and applies labels onto a variety of microtiter plates for sample tracking.
View product

Scinomix Barcode Scanning Systems

The Scinomix Barcode scanning modules are attachments of the Scinomix Tube labellers and enable them to read 2D matrix bottom ID codes and 1D barcodes on the sides of the tubes.
View product